Completing Drywall Repair

Starting First Coat of Paint Over Primed Drywall Repair

In the previous article in this series, we had completed the two layers of primer paint onto the sanded area of drywall repair, with each coat slightly exceeding the width of the prior to avoid a noticeable bulge in the finished repair. Now we are ready to apply the two, yes two, coats of paint. And this is where I ran into an unexpected challenge. When I started to paint over the second coat of primer on the wall, I continued my pattern of applying the paint not just on the repaired or … [Read more...]

Continuing With The Dryall Damage Repair

Second Layer of Drywall Compound

Last time I described, and showed with a lot of pictures, how I started to repair the large drywall crack on the wall supporting one of the French Doors between the living and dining rooms. If you missed the prior article you can simply use the above link. To remind you of where we left off, we had applied drywall compound onto the crack and surrounding wall surface followed by placing moistened non-adhesive drywall tape onto the wet drywall compound, smoothing the tape so no air pockets … [Read more...]

Sanding And Priming Twice The Drywall Repair Insert

Norton WallSand Drywall Screen

Yesterday we say how the Fitz from Clarke Basement Systems started to repair the drywall in our finished basement bedroom following his application of the FlexiSpan foundation wall crack repair system to stop future water leaks. Today, we continue that process. Remember, because the water leak occurred on a finished wall, it was our responsibility to re-finish the repair. So, I used this Norton WallSand Drywall Screen as my sanding tool. I don't like thinks that last. I find … [Read more...]

Featuring Recent Posts WordPress Widget development by YD