Daily Home Renovation Tips每日家裝修秘訣

Today and tomorrow we present a short two part series on finishing door handle installation.今天和明天，我們目前的短期兩個系列的一部分，就整理把手安裝。

Likely our frequent readers know my pet peave about renovation jobs that are not truly finished .可能我們經常讀者知道我的寵物peave約翻新工作，是沒有真正結束 。 When it comes to French Door from a building supply retailer, they arrive at your home usually without the hole cut for the door handle hardware to be installed.當談到法國的大門，從建設供應零售商，他們到達您的首頁，通常無孔減為把手硬件安裝。 Either your contractor or you need to do this.無論您的承辦商或您需要做到這一點。

Now, once this is done and the door handle hardware installed into the door and door frame, the job is not finished .現在，一旦這樣做是和把手的硬件安裝到門和門框，工作尚未完成 。 Below are two pictures to illustrate this point.下面是兩張圖片來說明這一點。 The first picture is of a door handle hardware within the door.第一張圖片是一個把手硬體內部的大門。

Do you think the job is finished?你覺得工作還沒有完成？ We don’t.我們不。

The finish, even after the application of two coats of paint on the French Doors, does not look professional, or finished .終點，即使申請後的兩個大衣的油漆對法國的門，看來並不樂觀的專業人士，或已完成的 。

The second picture below is of the face plate hardware within the door frame.第二下面的圖片是面對板硬件與門框。 Again, it looks messy and not finished .再次，它看起來雜亂無章，並沒有完成 。

It does not take much effort to finish the job.它不採取了很大努力，以完成這項工作。

In our concluding article tomorrow, we will tell you what simple steps we took to finish the job and show you the results.在我們總結的文章明天，我們將告訴你什麼簡單的步驟，我們採取了以完成這項工作，並顯示結果。 And, no, we did not use caulking.並沒有，我們沒有使用嵌縫。

To continue with the next article in this series, simply select this link to繼續與下篇文章在這一系列，只需選擇此鏈接 Part 2第2部分 . 。